•  
• Actuators
• All Thread Rod
• AWWA Brass
• Backflow Preventors
• Compression Couplings
• Fittings
• Flange Bolt & Nut Sets
• Hydrants and Valves
• Manholes & Grates
• Meter Boxes
• Penetration Seals
• Pipe
• Pipe Nipples
• Polyethylene Tubing
• Repair Clamps
• Restrainers
• Spool Pieces
• Tapping Machines
• Tapping Sleeves
• Test Plugs
• Valves
• Water Meters
•  

Dresser Pipe Repair Clamps

• Styles 4 & 41 Collar Clamp

  These collar clamps quickly and inexpensively stop leaks through the threads of screw collars (threaded couplings), solvent weld couplings (collars) and stab-type PVC joints. Repairs are permanent and normally made without interrupting service or dismantling the line. Style 4 clamps consists of two malleable split follower rings with interlocking ends on each section, two resilient split Dresser gaskets, and bolts as required for pipe sizes up to 4". Style 41 consists of the same parts except the split follower rings are steel and are connected by steel lock links.

• Style 75 Pipe Repair Clamps

  Provides for fast, simple, permanent repair of pinhole leaks in steel pipelines. Nothing to do but position clamp and tighten side bolts. Clamp body is marked for quick positioning over the leak or split and slotted for girth weld beads. Repairs are permanent, yet clamp can be removed and used elsewhere. These pipe clamps cost less than heavier sleeves, yet just as permanent. Also cost less to install. Plus, no costly tools, labor or time charges, and no bypassing or service interruptions.


• Styles 60 & 160 Bell Joint Clamps

  Dresser® Bell Joint Clamps permanently stop or prevent leaks through the jointing materials of cast iron bell-and-spigot joints. Completely adjustable to provide a close fit on both the pipe bell and spigot, one standard clamp fits virtually all the various makes of pipe within a nominal size. Style 60 and 160 repair clamps can be quickly installed with no interruption of service. A large, special rubber compound gasket shuts off the leak when compressed as the spigot ring is drawn up and, in turn, by bolts connected to the bell ring (anchored on the bell).

• Stlye 118 Handiand Clamp

  The Dresser® Style 118 Handiand Clamp is a field-proven, low cost band-type repair clamp for quick repair of small leaks and holes in steel gas piping. Installation is fast, easy and foolproof. Simply wrap the clamp around the pipe, drop the boltheads through the slotted lugs and tighten the nuts. Compression of the large size gasket seals the leak completely and permanently. Individual components of the Style 118 clamp are carefully engineered and constructed with lugs of ductile iron and bolts plated for long-life and durability.


• Style 360® repair clamp

  The Dresser® Style 360® repair clamp offers simplicity and ease of installation. Just wrap the clamp around the pipe, drop the bolts in place and tighten. It's that simple! Moreover, special oneinch long nuts allow the use of a standard deep socket wrench for complete tightening. In the popular 7.5 inch clamp width, there is also a third bolt so the middle bolt & nut can be used to pre-tighten the clamp. Additionally, the smaller sized clamps feature a flexible band which means less holding force is required while tightening.
•