UNS S31803/S32205
Description
Avesta Sheffield 2205 is a ferritic-austenitic stainless steel which combines many of the beneficial properties of both ferritic and austenitic steels. As a result of high chromium and molybdenum contents, the steel has very good pitting and uniform corrosion resistance to stress corrosion cracking as well as high mechanical strength.
2205 has good weldability and can be welded using most of the welding techniques for stainless steels. Due to the balanced composition, when welded correctly, the heat affected zone contains sufficient austenite to avoid the risk of localized corrosion. The chemical composition of 2205 is balanced to give a microstructure containing roughly equal amounts of ferrite and austenite.
MORE INFO
UNS N08020
Description
A nickel-iron-chromium alloy with additions of molybdenum and copper. Alloy 20 has great resistance to pitting, general corrosion, and crevice corrosion in chemicals containing sulfuric, nitric, and phosphoric acids as well as chlorides. It also contains niobium for stabilization and is used for piping, tanks, pumps, valves, heat exchangers, and other process equipment.
MORE INFO
Molybdenum Steel
Description
Type 316 is a molybdenum steel possessing improved resistance to pitting by solutions containing chlorides and other halides. In addition, it provides excellent elevated temperature tensile, creep and stress – rupture strengths.
MORE INFO
Titanium Bearing Steel
Description
321/321H is a titanium bearing steel not sensitive to intergranular corrosion after heating within the range of carbide precipitation. You may see alot more information about casino 400 bonus. This stainless steel grade is often used in refineries as well as high temperature chemical processing, heat exchanger tubes and high temperature steam service.
MORE INFO
UNS S30400/S30403
Description
304 stainless steel is a low carbon (0.08% max) version of basic 18-8 also known as 302. Type 302 has 18% chromium and 8% nickel. Type 304 has slightly lower strength than 302 due to its lower carbon content. Type 304 stainless steel finds extensive use in welding applications because the low carbon permits some exposure in the carbide precipitation range of 800 0 F – 1500 OF without the need for post-annealing operations. However, the severity of corrosive environments may necessitate annealing after welding or the use of 304L. Type 304L has a carbon content of 0.03% or less. This alloy can be used in the as-welded condition without becoming susceptible to intergranular corrosion.
MORE INFO
UNS S32750 & UNS S32760
UNS S32750 & UNS S32760
Super Duplex Plate/Sheet
Super Duplex Seamless & Welded Tube
Super Duplex Seamless & Welded Pipe
Super Duplex Round Bar
Super Duplex Flanges F53/F55
Super Duplex Specialty Forgings
Super Duplex Seamless & Welded BW Fittings
MORE INFO
clients
We Serve All Types Of Clients
Businesses
Churches
Homeowners
Schools
Municipalities
Parks
full service
From Start To Finish
From the very beginner stages of getting a quote to the final touches, Divi Electrical will be there to guide you, answer questions, and work diligently to meet project goals and deadlines in an efficient manner.
We are a full-service electrical contractor. No job is too big or too small for Divi Electrician. From the moment you contact us for a quote until the moment you light up your home, we promise to meet your needs and raise your expectations.
Switches & Outlets
Your content goes here.
Circuit Breakers
Your content goes here.
Surge Protectors
Your content goes here.
Smoke Detectors
Your content goes here.
Lighting Installation
Your content goes here.
Solar Panels Wind
Your content goes here.
Smart Home Services
Your content goes here.
Wind Turbines
Your content goes here.
Generators
Your content goes here.
Request A Quote
Contact us to price your custom project!